Cianowil Artiglio GEL is a cyanoacrylate istant glue. Suitable for plastic, wood, gum, metal, leather and ceramic. Anti-tampering cap.

Gel formula reduce problems of overload and pouring, particularly on very tight surface

Cianowil Artiglio is a cyanoacrylate istant glue. Suitable for plastic, wood, gum, metal, leather and ceramic. Anti-tampering cap.

Artiglio glue is a solvent base glue particularly suitable for EVA foam and plastazote.

Use:

Spread a thin layer of glue on both sides to be glued with the help of a spatula
​or a brush, covering well each point and dont't leave accumulation of product.

Leave the glue to rest for 10 minutes or anyway until it appears dull and semi dry.

Approach the two part to be glued and couple them by pressing with hands.

Cautions:

Don't use on polystyrene

Don't use near flame

Flammable product

Artiglio glue is a solvent base glue particularly suitable for EVA foam and plastazote. Its highly transparency allows gluing without any glue burrs remaining visible on the finished product.

Use:

Spread a thin layer of glue on both sides to be glued with the help of a spatula
​or a brush, covering well each point and dont't leave accumulation of product.

Leave the glue to rest for 10 minutes or anyway until it appears dull and semi dry.

Approach the two part to be glued and couple them by pressing with hands.

Cautions:

Don't use on polystyrene

Don't use near flame

Flammable product

Wicolla is a vinilic base adesive particularly suitable for polystyrene becaus give strong gluing without any corrosion of material.

Suitable for polystyrene, wood, felt, cardoboard, plastic and leather.

Foam Lux isn't EVA foam, it's a plastazote LD45, that means it's softer compared to normal EVA foam.

Foam Lux is suggested to cover the led light in order to achieve a good diffusion effect of the light. 1 or 2 layer are suggested depending on the led power.

To dye the Foam Lux you must use a primer before, like our Hexflex primer transparent, and then airbrush painting with transparent colors, like the glass colors, and final transparent top like Valour Clear Coat. Instead paintig it's a solution to use colored led light and finish the Foam Lux with only primer and top transparent

Miniature Leaf Punch - ORANGE

Miniature Leaf Punch perfect to create miniature leaves compatible with scales 1:43 1:48 1:65 (32mm, 28mm, and 25mm). You can use various types of paper and other materials. This punch will make 4 types of mini OAK leaves.

We recommend using dried leaves in different colors. Natural leaves need to be treated to keep the colors. There are many techniques to achieve this effortlessly. They may be also painted.

Blade can be sharpened by punching through aluminum foil or lubricated by punching through waxed paper.

Miniature Leaf Punch - LIGHT BLUE

Miniature Leaf Punch perfect to create miniature leaves compatible with scales 1:43 1:48 1:65 (32mm, 28mm, and 25mm). You can use various types of paper and other materials. This punch will make 4 types of mini LIME leaves.

We recommend using dried leaves in different colors. Natural leaves need to be treated to keep the colors. There are many techniques to achieve this effortlessly. They may be also painted.

Blade can be sharpened by punching through aluminum foil or lubricated by punching through waxed paper.

Miniature Leaf Punch - MEDIUM BLUE

Miniature Leaf Punch perfect to create miniature leaves compatible with scales 1:35, 1:43, and 1:48 (54mm, 32mm, and 28mm). You can use various types of paper and other materials. This punch will make 3 types of MAPLE leaves.

Blades can be sharpened by punching through aluminum foil or lubricated by punching through waxed paper.

Miniature branch Punch - YELLOW

Miniature branch Punch perfect to create miniature branches with leaves compatible with scales 1:65 1:48 1:43 1:35 1:30 1:22. Although, you can use various types of paper and other materials, we will recommend you to use metal flexible foil-

Branch length: 15mm