Resina E-30 effetto acqua is made by Prochima expressly  to have the real water effect. It's a rresin two component completely odorless good for any kind of material coating.

Resina E-30 effetto acqua could be used for many kind of application, to create gems, for led lightning and also to coat polystyrene, in order to make it strong.

The product is provided in two different packs (a + b).The two component must be mixed in proportion of 20 part o A with 12 part of B in volume. After mixing very well you can strain into stamp or give on the surface to cover with a soft brush.

Handle with latex gloves.

Resina E-30 effetto acqua is made by Prochima expressly  to have the real water effect. It's a rresin two component completely odorless good for any kind of material coating.

Resina E-30 effetto acqua could be used for many kind of application, to create gems, for led lightning and also to coat polystyrene, in order to make it strong.

The product is provided in two different packs (a + b).The two component must be mixed in proportion of 20 part o A with 12 part of B in volume. After mixing very well you can strain into stamp or give on the surface to cover with a soft brush.

Handle with latex gloves.

Roll Maker is the ultimate tool to make all kind of tubes, tentacles, and wires to be used with any kind of putty or clay.

Depending on your sculpting material you may need to wet repeatedly the plates or your fingers with bit of water to reduce stickiness. Adding talcum powder to water may help with some putties like Green Stuff. 

Use a toothbrush to clear any residue from plates if required, and never use wire brushes or metal implements since plates may be damages. 

This set includes:

2 large plates Version XL
2 medium plates Version XL
2 small plates Version XL
2 guide bars. Use them to hold the plates and to get an extra 45º position for new textures.

This tool will give you endless of possibilities.

Blue Stuff sticks is a new generation of thermoplastic molding material that can be reduced to mouldable conditions by immersion in hot water for 3 minutes.

It will allow you to create an instant mold of any piece you wanted by pressing the plastic material against the piece you want to have the mold made from. After that, make copies by using any kind of putty, polyester resins or even epoxy resins. Nothing will get stuck. REUSABLE plastic moulding for all levels. 

A new improved formulation will allow you to have better details since the plastic will remain more time in a soft state.

This set contains 4 bars and it will last forever.

Dimension of each bar: 5.8x1.5x0.7cm

Blue Stuff sticks is a new generation of thermoplastic molding material that can be reduced to mouldable conditions by immersion in hot water for 3 minutes.

It will allow you to create an instant mold of any piece you wanted by pressing the plastic material against the piece you want to have the mold made from. After that, make copies by using any kind of putty, polyester resins or even epoxy resins. Nothing will get stuck. REUSABLE plastic moulding for all levels. 

A new improved formulation will allow you to have better details since the plastic will remain more time in a soft state.

This set contains 8 bars and it will last forever.

Dimension of each bar: 5.8x1.5x0.7cm